XB

Items: 15 of 5, per page
  • Designed in house and calibrated with a programmable ecm, average HP gain is +10% over stock, tuning is REQUIRED. Single source calibration via dyno and road tuning for 03-07 XB9 year models.

    Fits all XB models, outlet style may differ from picture.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    Since you own a Buell, you know it shakes as it runs. PLEASE check the mounting hardware before/after every ride. If something is worn out, replace it. Need new clamps, ask me for some. I use Clampco clamps, they are available online at about $12 each plus shipping. Also make sure to check the front bushings at the lower front of the engine. They do wear out, replace them as required.

    Pricing has changed for all ECMs.

    New ECM's are in short supply and IDS recommends sending in your stock unit for reprogramming.

    • $675.00
  • Polished in house, not a full mirror shine or perfectly smooth. Some surface tooling marks may be visible from mandrel bending. This is per section. Headers are separate from the muffler, so a full system requires 2. Slip-on units are considered as one unit.

    • $150.00
  • Built in house and calibrated with a matched ecm, average HP gain is +10% over stock, tuning is REQUIRED. 

    Fits all XB models, outlet style may differ from picture. This is based on a Magnaflow 11148 muffler and has slightly better ground clearance than a stock exhaust. This example does not come with an ECM.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    Since you own a Buell, you know it shakes as it runs. PLEASE check the mounting hardware before/after every ride. If something is worn out, replace it. Need new clamps, ask me for some. I use Clampco clamps, they are available online at about $12 each plus shipping. Also make sure to check the front bushings at the lower front of the engine. They do wear out, replace them as required.

    • $475.00
  • Cerakote High Temp ceramic. Reduces heat from the exhaust. Per section, headers are separate from the exhaust.

    Please specify the color required. I typically have several colors on hand (black, cobalt, gold, silver, etc.)

    • $150.00
  • Designed in house, the average HP gain is +10% over stock, tuning is REQUIRED, wideband tuning is highly recommended.

    Fits all 2008-2010 European XB models with a 2.5" outlet from the header into the muffler, outlet style may differ from picture.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.


    Please ask for an estimate on shipping, you will be billed a separate amount to cover that.


    Since you own a Buell, you know it shakes as it runs. PLEASE check the mounting hardware before/after every ride. If something is worn out, replace it. Need new clamps, ask me for some. I use Clampco clamps, they are available online at about $12 each plus shipping. Also make sure to check the front bushings at the lower front of the engine. They do wear out, replace them as required.

    • $675.00