Race ecm, Buell 1125 CR
Zoom image

Race ecm, Buell 1125 CR

Pre-programmed race ecm, Buell 1125 CR, specific to the exhaust systems I build.

  • $300.00
Qty:  
  • SKU
    10000000002

For DDFI­3 and DVCS only (2008 and later Buell and all EBR products):

1. Begin with the ignition key off, run/stop switch in “Run” position, and throttleclosed.

2. Turn the ignition key onÍž do not start the motorcycle.

3. After at least one second, hold the throttle fully open for one second.

4. Release the throttle and allow it to snap closed.

5. After at least one second, hold the throttle fully open for one second.

6. Release the throttle and allow it to snap closed.

7. After at least one second, hold the throttle fully open for one second.

8. Release the throttle and allow it to snap closed.This completes the TPS zero process. At this point, you can turn off the ignition or start the motorcycle.