Exhaust systems

Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

Items: 112 of 17, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Kit is for removal of the secondary (side) exhaust pipe. Pre-programmed ECM is included.

    Made from 304 stainless steel, mandrel bent tubing, raw finish. 

    • $435.00
    Only 5 left in stock
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched race ecm, average HP gain is +15 over stock

    Please specify gearing when ordering (stock 41 tooth or 44+)

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $885.00
    Only 1 left in stock
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched ecm, average HP gain is +15 over stock


    Please specify gearing (stock or 44+ tooth)

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $935.00
    Only 1 left in stock
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched ecm, average HP gain is +14 over stock

    Fits Buell 1125R  models


    Highest HP output to date was at the Buell/EBR factory on their dyno at 143.1 hp.


    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $885.00
    Only 1 left in stock
  • Product is out of stock

    Designed in house and calibrated with a matched ecm, average HP gain is +10% over stock

    Fits 2008-2010 model XB12, outlet style may differ from picture. Pre-programmed ecm is included. Calibration developed using wideband O2 sensors.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $885.00
  • Product is out of stock

    Designed in house and calibrated with a matched ecm, average HP gain is +10% over stock, tuning is REQUIRED.

    Fits all XB models, outlet style may differ from picture.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $635.00
  • Product is out of stock

    For the older model tube frame Buells. Works with most X1's, M2's and others with a 2.5" outlet at the header. For the fuel injected models, a pre-programmed ecm is available.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $450.00
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched ecm, average HP gain is +14 over stock

    Fits Buell 1125CR  models


    Highest HP output to date was at the Buell/EBR factory on their dyno at 143.1 hp.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $885.00
    Only 1 left in stock
  • Drag and drop me to the cart

    Polished in house, not a full mirror shine or perfectly smooth. Some surface tooling marks may be visible from mandrel bending. This is per section. Headers are separate from the muffler, so a full system requires 2. Slip-on units are considered as one unit.

    • $125.00
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched ecm, average HP gain is +14 over stock

    Fits Buell 1125R  models


    Highest HP output to date was at the Buell/EBR factory on their dyno at 143.1 hp on the original RT-3, this is an updated design with an oval body.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $935.00
    Only 1 left in stock
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched ecm, average HP gain is +14 over stock

    Fits Buell 1125CR  models


    Highest HP output to date was at the Buell/EBR factory on their dyno at 143.1 hp on the original RT-3, this is an updated design with an oval body.

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $935.00
    Only 1 left in stock
  • Drag and drop me to the cart

    Designed in house and calibrated with a matched ecm, average HP gain is +15 over stock


    Please specify gearing (stock or 44+ tooth)

    Everything here is hand fabricated in house, there is a short lead time of 2 to possibly 6 weeks to build as all systems are built to order.

    • $935.00
    Only 1 left in stock
Items: 112 of 17, per page
Bestsellers
  • Drag and drop me to the cart
    • $885.00
    Only 1 left in stock
  • Drag and drop me to the cart
    • $935.00
    Only 1 left in stock
  • Drag and drop me to the cart
    • $435.00
    Only 5 left in stock
  • Drag and drop me to the cart
    • $935.00
    Only 1 left in stock